Anti Glare & Anti Reflective TV Screens

The largest obstacle to daylight readable digital TV advertising and signage display screens is the glare and reflection that comes as standard with the sunshine or ambient light hitting the glass or acrylic screen.

If the weather is too bright, our anti glare & anti reflective screen coatings ensure TV pictures are fully readable outdoors in bright sun shine and inside in bright artificial lights.  Aqualite Outdoor TV screens are coated with an anti glare film to reduce glare and reflection from the screen in outdoor or brightly lit locations. The screens are coated 4 times with anti reflective coatings on both sides of the glass.

If the weather is dull or overcast, our back-lit LED TV screen’s in ss-built sensors will automatically adjust the brightness level to give the best possible picture whilst helping to save energy. By further enhancing the brightness and contrast levels of the TV panel, the use of this anti reflective coating ensures that television pictures are fully visible and digital signage is fully readable in the brightest daylight.

Anti Glare & Anti Reflective TV Display Screen

Aqualite Outdoor TV screens are manufactured using glass which has inherent anti glare and anti-reflective qualities. All Aqualite screens are coated a total of four times with an Anti-Reflective coating on both sides of the glass, this helps to absorb additional glare and reduce reflection when used in outdoor locations where high ambient light is a feature.

Removing unwanted glare and reflection by a further 65% the Aqualite Anti Reflective Film gives high visibility outside in broad daylight and bright sunlight.

Glare can often never be fully eradicated, however, if your installation is going to be in a location particularly prone to high brightness levels, you can consider adding an additional layer of Anti-Reflective Film. This will help to reduce glare by an additional 65%. It’s easy to apply (and remove if required) and can be supplied at the time of ordering your screen or you can purchase at a later date and fit retrospectively.

Anti Blend & Anti Reflexions Film für TV Bildschirme

Standard Brightness (AQLS) Models  – (500cd/m2)

Our Standard Brightness models are perfectly suited to outdoor areas where some natural or artificial shade is present. These models are suited to areas such as under an awning or canopy, under a concourse, on a shaded wall or under trees or natural cover. At 500 cd/m2 (or Nits) these models offer a higer brightness than the average LCD TV at home and like all of our screens, offer Full HD 1080P pixture resolution.

High Brightness (AQLH) Models – (1,500cd/m2)

Our premium AQLH range of outdoor LCD TV screens are back lit with LED lighting technology. This is not screen edge- only LED lighting, as with the current crop of consumer indoor LED TVs, but full LED coverage behind the LCD TV panel.

These High Brightness (1,500cd/m2) TV screens are classified as ‘sunlight readable’ and are best suited to high brightness outdoor conditions where there is little or no shade.

The LED brightness can easily be adjusted via the supplied remote control and on-screen menu, so that the TV screen is displaying the optimum brightness for various outdoor conditions.

Lower power consumption requirements of LED will also be better for the environment and lead to cheaper electricity bills for the end user than that of an equivalent LCD TV screen.

Typically these are best suited to applications such as yachts, school playgrounds, hotel grounds, construction sites and roof terraces. Anywhere where the sun is a major factor and high brightness and screen visibility paramount.